You have no items in your shopping cart.
Subtotal: €0.00
The iRig Stream Pro audio interface takes your podcasting and streaming to a whole new level.
This 24-bit, 96 kHz audio interface for iPhone, iPad, Android and Mac/PC offers an XLR mic preamp, stereo RCA, TRRS and device inputs (loopback) - plus advanced routing, convenient controls and optimal portability.
It's everything you need for professional-quality streaming, in the palm of your hand.
Mix and stream up to 4 audio sources iRig Stream Pro makes it easy to connect all your audio sources and route them to a streaming or recording app.
Connect your favorite studio mic or guitar via the XLR / 1/4" combo jack, mix DJ decks or a keyboard via the stereo RCA inputs, then plug in your earphones for playback and an additional mic/line input You can even route the output of your smartphone, tablet or laptop and sing along or jam along.
SKU | IKMIRIGSTREAMPRO |
---|---|
EAN/GTIN | 8025813871038 |
type | Interface |
Size | No |
Product weight | 550g |
Dimensions | 123 mm/4,84” x 67 mm/2,63” x 40 mm/1,57" |
Color | Black |
Screw thread | No |
Connection | XLR |
other features | strong>General: Type: 2 in/2 out or 4 in/2 out Conversion: 24-bit A/D, 24-bit D/A Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Power: USB bus powered. For 48V operations with iOS devices, a battery or DC IN is required. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Pro charges the connected iOS lightning device Measurement: 3x LEDs for overall streaming signal. Peak meter for Mic/Inst input. Device connection: mini DIN Line input: Connector: 2x RCA (unbalanced) Left/Right Nominal Input Level: -10 dBV Headroom: 10 dB - Level @ max Input Impedance: 16.5k Ohm Frequency response: from 20 Hz to 20 kHz (-1.5 dB) Microphone input Microphone Input: Balanced, XLR. Pin 2: Hot / Pin 3: Cold / Pin 1: Earth Microphone input level: from 3.8 mV RMS to 388 mV RMS Microphone input impedance: about 2 kOhm Analog Gain Range: 40 dB Phantom power: +48 V ± 4 V Frequency Response: from 20 Hz to 20 kHz (-1 dB) Gain @ min from 20 Hz to 20 kHz (-3 dB) Gain @ max Instrument Input: Instrument Input: Unbalanced, Hi-Z, TS 1/4" Jack, Tip: Signal / Shield: Ground Instrument input level: from 70 mV RMS to 1.8 V RMS Instrument Input Impedance: 1M Ohm Analog Gain Range: 28 dB Frequency Response: from 20 Hz to 20 kHz (-1 dB) Gain @ min from 20 Hz to 20 kHz (-3 dB) Gain @ max Headset/Phones Connector: 1/8” TRRS Jack (CTIA Wiring Standard) Supply voltage: > 2.5 V Microphone gain: adjustable with numbered thumbwheel Frequency range: 20 Hz – 20 kHz Headphone Level Control: Numbered Thumbwheel Note: all measurements made with Stream Level knob at 0dB. |
delivery includes | iRig Stream Pro interface Lightning to mini-DIN connection cable with charging options (60cm/23.62") USB C-Type to mini-DIN connection cable (60cm/23.62") USB A-Type to mini- DIN connection cable (60cm/23.62") 2x 1.5V AA battery |